8
5.
Hand wash, rinse, and dry removable parts and interior surfaces
thoroughly. Use a clean sponge or soft cloth and a mild detergent
in warm water.
Do not use abrasive or harsh cleaners such as window sprays,
scouring cleansers, flammable fluids, cleaning waxes,
concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or
gaskets. Do not use paper towels, scouring pads, or other
harsh cleaning tools. These can scratch or damage materials.
To help remove odors, you can wash interior walls with a
mixture of warm water and baking soda (2 tbs to 1 qt [26 g to
0.95 L] of water).
6.
Replace the removable parts.
7.
Use the appropriate cleaning method for your exterior finish.
Painted metal:
Wash exteriors with a clean sponge or soft cloth
and a mild detergent in warm water. Do not use abrasive or harsh
cleaners, or cleaners designed for stainless steel. Dry thoroughly
with a soft cloth.
8.
Remove the base grille by opening the freezer door and removing
the two Phillips-head screws. Pull the grille toward you to remove.
9.
Replace the base grille by aligning the ends of the grille with the
leveling assemblies on each side and snapping the grille into
place. Reinstall the screws.
10.
Replace all frozen food.
11.
Plug in freezer or reconnect power.
12.
Set temperature control to desired setting. See “Using the
Control.”
Changing the Light Bulb
NOTE:
Not all appliance bulbs will fit your freezer. Be sure to replace
the bulb with an appliance bulb of the same size, shape, and wattage.
1.
Unplug freezer or disconnect power.
2.
Remove the light shield by squeezing the lens from the sides,
pushing back and pulling down.
3.
Replace bulb with a 40-watt maximum appliance bulb or LED bulb
NOTE:
Some LED replacement light bulbs are not recommended
4.
Replace the light shield.
5.
Plug in freezer or reconnect power.
Power Interruptions
If the power will be out for 24 hours or less, keep the door closed to
help food stay cold and frozen.
If the power will be out for more than 24 hours, do one of the
following:
Remove all frozen food and store it in a frozen food locker.
If a food locker is not available, consume or can perishable food
at once.
REMEMBER:
A full freezer stays cold longer than a partially filled one.
A freezer full of meat stays cold longer than a freezer full of baked
goods. If you see that food contains ice crystals, it may be refrozen,
although the quality and flavor may be affected. If the condition of the
food is poor, dispose of it.
Moving Care
When you are moving your freezer to a new home, follow these steps
to prepare it for the move.
1.
Remove all frozen food.
2.
Unplug the freezer.
3.
Take out all removable parts, wrap them well, and tape them
together so they don’t shift and rattle during the move.
4.
Clean the freezer thoroughly.
5.
Tape the freezer shut and tape the electrical cord to the cabinet.
When you get to your new home, refer to the “Installing Your Freezer”
and “Operating Your Freezer” sections for information on installation
and setting the controls.
rated for wet/damp locations.
for wet/damp environments. Refrigerator fresh food and freezer
compartments are considered wet/damp environments. Read and
follow all instructions on the LED packaging when replacing the
factory installed LED bulb. A replacement LED bulb can be
purchased from an authorized dealer.
Содержание W10675483A
Страница 23: ...23 NOTES...
