8
USING STEAM FEATURES,
cont.
• In the event that the steam / bursts of steam are not easily discharged due to insufficient
water within the tank, refill the tank with water up to the mark indicating “FULL”.
(
☞
Refer to page 5.)
• If the bursts of steam decrease during usage, place the iron back on the cradle for reheating.
(If the burst of steam button has been operated more than 10 times consecutively, hot water
droplets may be discharged.)
• Do not place the iron on its side or upside down. This may cause water leakage and may
result in burns due to the escape of hot water.
USING THE SPRAY FUNCTION
• The spray button can be utilized with either the “Dry” or the “Steam” functions.
• The spray button should be pressed only while the iron
is kept level.
• If the spray does not discharge upon initial usage, then
press the spray button several times.
• The spray function helps to smooth cotton and linen fabrics,
as well as stubborn wrinkles on other fabrics.
• Some fabrics may stain if sprayed with water, so consult the
garment care label carefully.
• When storing the iron after using the spray function, press the
spray button several times after the water has been drained from the tank, to be sure that all
water is completely removed from within the spray unit.
Press the spray button to
release a mist of water.
