background image

6

Maytag Co.

113062 - 17

For personal safety, the dryer must be electrically grounded
in accordance with local codes and/or the National Electrical
Code ANSI/NFPA NO. 70-LATEST EDITION or in Canada, the
Canadian Electrical Codes Parts 1 & 2 CSA C22.1-1990 or
LATEST EDITION.

NOTE: 

Failure to do so will void the warranty.

Under no circumstances should the dryer door switches, lint
door switches, or heat safety circuits ever be disabled.

This dryer is not to be used in the presence of dry cleaning
solvents or fumes.
Remove articles from the dryer as soon as the drying cycle
has been completed.

Fire Hazard

Personal injury or fire could result.

 

WARNING

!

Fire Hazard

Articles left in the dryer after the drying and cooling
cycles have been completed can create a fire
hazard.

 

WARNING

!

Read and follow all caution and direction labels attached to
the dryer.
Dryer must not be installed in an area where it will be exposed
to water or weather.

Fire Hazard

Dryer must never be operated with the lint filter or
screen not in place, even if an external lint
collection system is used.

 

WARNING

!

For safety, proper operation, and optimum performance, the
dryer must not be operated with a load less than sixty-six
percent (66%), 19.8 lb (9.07 kg) of its rated capacity.

Electrical Shock Hazard

You must disconnect and lockout the electric supply
and the gas supply before any covers or guards are
removed from the machine to allow access for
cleaning, adjusting, installation, or testing of any
equipment per OSHA standards.

 

WARNING

!

IMPORTANT: 

Dryer must be installed in a location/

environment, which the ambient temperature remains
between 40° F (4.44° C) and 130° F (54.44° C).

  Notes _______________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

Содержание MLG32PDB


















Отзывы: