background image

2

Maytag Co.

113062 - 17

Dryer Safety

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance.  Always read and obey all safety
messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING”.
These words mean:

You can be killed or seriously injured if you don’t immediately
follow instructions.

You can be killed or seriously injured if you don’t follow
instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what
can happen if the instructions are not followed.

It is recommended that the owner post, in a prominent location, instructions for the customer’s use in the event the customer
smells gas.  This information should be obtained from your gas supplier.

Post the following warning in a prominent location.

!

!

 

WARNING

!

 

DANGER

!

WARNING: For your safety the information in
this manual must be followed to minimize the
risk of fire or explosion or to prevent property
damage, personal injury or death.

– Do not store or use gasoline or other

flammable vapors and liquids in the
vicinity of this or any other appliance.

– WHAT TO DO IF YOU SMELL GAS:

Do not try to light any appliance.

Do not touch any electrical switch; Do not
use any phone in your building.

Clear the room, building or area of all
occupants.

Immediately call your gas supplier from a
neighbor’s phone.  Follow the gas
supplier’s instructions.

If you cannot reach your gas supplier,
call the fire department.

– Installation and service must be performed by

a qualified installer, service agency or the gas
supplier.

AVERTISSEMENT: Assurez-vous de bien suivre
les instructions données dans cette notice pour
réduire au minimum le risque d’incendie ou
d’explosion ou pour éviter tout dommage
matériel, toute blessure ou la mort.

– Ne pas entreposer ni utiliser d’essence

ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.

– QUE FAIRE SI VOUS SENTEZ UNE

ODEUR DE GAZ:

Ne pas tenter d’allumer d’appareils.

Ne touchez à aucun interrupteur; Ne pas
vous servir des téléphones se trouvant dans
le bâtiment.

Évacuez la pièce, le bâtiment ou la zone.

Appelez immédiatement votre fournisseur
de gaz depuis un voisin.  Suivez les
instructions du fournisseur.

Si vous ne pouvez rejoindre le fournisseur
de gaz, appelez le service des incendies.

– L’installation et l’entretien doivent être assurés

par un installateur ou un service d’entretien
qualifié ou par le fournisseur de gaz.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres
vapeurs ou liquides inflammables à proximité de cet
appareil ou de tout autre appareil.

Содержание MLG32PDB


















Отзывы: