Maytag MGR8800HK, Инструкция пользователя

Страница: 6 / 44

6
Sealed Surface Burners
A
B
D
E
C
A. Burner cap
B. Burner base C. Alignment pins
D. Igniter
E. Gas tube opening
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
Burner cap: Always keep the burner cap in place when using a
surface burner. A clean burner cap will help avoid poor ignition and
uneven flames. Always clean the burner cap after a spillover and
routinely remove and clean the caps according to the “General
Cleaning” section.
Burner ports: Check burner flames occasionally for proper size
and shape as shown in the previous illustration. A good flame
is blue in color, not yellow. Keep this area free of soil and do not
allow spills, food, cleaning agents or any other material to enter
the burner ports.
COOKTOP USE
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
Electric igniters automatically light the surface burners when
control knobs are turned to LITE.
Before setting a control knob, place filled cookware on the
grate. Do not operate a burner using empty cookware or without
cookware on the grate.
The flame should be adjusted so it does not extend beyond the
edge of the pan.
To Set:
1. Push in and turn knob counterclockwise to LITE.
All surface burners will click. Only the burner with the control
knob turned to LITE will produce a flame.
2. Turn knob to anywhere between HIGH and LOW.
REMEMBER:
When range is in use, the entire cooktop area
may become hot.
Power Failure
In case of prolonged power failure, the surface burners can
be lit manually. Hold a lit match near a burner and turn knob
counterclockwise to LITE. After burner lights, turn knob to desired
setting.
KEYPAD FEATURE INSTRUCTIONS
CONTROL
LOCK
hold 3 sec. to
lock
Oven control
lockout
No keypads will function with the controls locked.
1. Check that the oven and the Kitchen Timer are off.
2. Press and hold CONTROL LOCK keypad for 3 seconds.
3. If enabled, a tone will sound, and “CONTROL LOCKED” will be displayed.
4. Repeat to unlock.
SETTINGS Oven use
functions
Enables you to personalize the audible tones and oven operation to suit your needs. See the
“Oven Use” section.
Power™ Burner Feature
The left front burner is designed to give ultra-power when fully on.
It can be used to rapidly bring liquid to a boil and to cook large
quantities of food.
Flex-Choice™ Burner Feature
The Flex-Choice™ feature allows for more precise simmering and
low temperature cooking. It is the right rear burner.
Gas tube opening: Gas must flow freely throughout the gas tube
opening for the burner to light properly. Keep this area free of soil
and do not allow spills, food, cleaning agents or any other material
to enter the gas tube opening. Keep spillovers out of the gas tube
by always using a burner cap.
B
A
A. 1-1
1
⁄
2
” (2.5-3.8 cm)
B. Burner ports