14
Cook & Hold
Cook & Hold allows you to bake for a preset amount of time,
followed by a one-hour Keep Warm cycle.
To set Cook & Hold:
1. Press the
Cook & Hold
pad.
• “BAKE” and “HOLD” flash.
• 000 lights in the display.
2. Select the oven temperature. The oven
temperature can be set from 170
°
to 550
°
. Press
or press and hold the
More+
or
Less-
pad.
• Press the
More+
pad to increase the temperature.
• Press the
Less-
pad to decrease the temperature.
3. Press
Cook & Hold
again or wait
four
seconds.
• “HOLD” flashes.
• 00:00 flashes in the display.
4. Enter the amount of time you want to bake by pressing the
More+
or
Less-
pad. Bake time can be set from ten
minutes (00:10) to 11 hours, 59 minutes (11:59).
• “BAKE” and “HOLD” light in the display.
• The baking time will light in the display.
• The baking time will start counting down.
Notes:
•
To change oven temperature during cooking
, press
the
Bake
pad, then press the
More+
or
Less-
pad until
the desired temperature is displayed.
•
To change oven temperature during preheat
, press
the
Bake
pad
twice
, then press the
More+
or
Less-
pad until the desired temperature is displayed.
•
If you forget to turn off the oven, it will automatically turn
off at the end of 12 hours. If you wish to deactivate this
feature, see page 16.
When the cooking time has elapsed:
• Four beeps will sound.
• “BAKE” will turn off.
• “HOLD” and “WARM” will light.
• 170
°
will display.
After one hour in HOLD WARM:
• “End” will display.
• The time of day reappears in the display.
To cancel Cook & Hold at any time:
Press the
CANCEL
pad. Remove food from oven.
CAUTION
Do not
use delayed baking for highly perishable foods such
as dairy products, pork, poultry, or seafood.
When using Delay, the oven begins to cook later in the day.
Set the amount of time that you want to delay before the oven
turns on and how long you want to cook. The oven begins to
heat at the selected time and cooks for the specified length of
time, then keeps food warm for up to one hour.
Delay time can be set from 10 minutes (00:10) to 11 hours, 59
minutes (11:59).
To set a Delayed Baking cycle:
1. Press the
Delay
pad.
• “DELAY” flashes.
• 00:00 flashes in the display.
2. Press the
More+
or
Less-
pad to set the
delay time.
While “DELAY” is still flashing:
3. Press the
Cook & Hold
pad.
• 000 lights in the display.
• “BAKE” and “HOLD” flash.
4. Press
More+
pad to set the baking temperature.
• 00:00 and “HOLD” flash.
• “BAKE” stays lit.
5. Press
More+
pad to set the baking time.
• The Delay time, “DELAY”, “BAKE” and “HOLD” light in
the display.
Delay Bake
4. Allow the oven to preheat for 8-15 minutes.
• When the set oven temperature is reached, one long
beep will sound.
• To recall the set temperature during preheat, press the
Bake
pad.
5. Place food in center of oven, allowing a minimum of two
inches between utensil and oven walls.
6. Check cooking progress. Cook longer if needed.
7. When cooking is finished, press
CANCEL
.
8. Remove food from the oven.
Baking Differences Between Your Old
and New Oven
It is normal to notice some baking time differences between
a new oven and an old one. See
Adjusting the Oven
Temperature
on page 16.
Cont.
