Maytag MEDB766FW0, Инструкция по использованию и уходу

Страница: 6 / 16

6
CYCLE GUIDE — SENSOR CYCLES
Senses moisture in the load and shuts off when the load reaches the selected dryness level. The dry temperature shown is the default
temperature. This setting can be modified on some cycles but is not retained for future drying with this cycle. The dryness level shown is the
default dryness setting. This setting can be changed on some cycles and will be retained for future drying with this cycle. Available options
shown in bold are default settings for that cycle.
Load Size Recommendations
For best results, follow the wet load size recommendations noted
for each cycle.
Small load: Fill the dryer drum with 3–4 items, not more than
1/4 full.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
†
You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is not available on Sanitize or Delicates. On
Steam Models for these cycles, Wrinkle Prevent without Steam will be run to keep optimal clothes protected/performance.
Use Sensor Cycles for better fabric care and energy savings
To get the most energy savings and enhanced fabric care from your dryer, use the Sensing cycles. These cycles measure the drying air
temperature and moisture levels to turn the dryer off once the load reaches the selected dryness level. For electric models, dryer performance
and results may vary with service voltage less than 240.
Items
to dry:
Cycle: Temperature: Dry Level: Available
Options:
Cycle Details:
Sheets and
towels
Sanitize* Wrinkle Prevent
w/o Steam
This is a long cycle with high heat
which has been proven to reduce
household bacteria. This cycle is
not recommended for all fabrics.
Jackets,
comforters,
pillows
Bedding Damp Dry
Signal
Wrinkle Prevent
†
Use for drying large, bulky
items; do not overfill dryer drum.
Partway through the cycle, the
signal will sound for 2 minutes
to indicate when it is time to
rearrange items for optimal
drying.
Heavyweight
items such as
towels or heavy
work clothes
Heavy Duty Damp Dry Signal
Wrinkle Prevent
†
Static Reduce
Offers stepped drying starting
with High heat followed by
Medium High heat for enhanced
fabric care and energy savings.
Work clothes,
casual wear,
mixed cottons,
corduroys
Normal Damp Dry Signal
Wrinkle Prevent
†
Static Reduce
Starts at High Heat, quickly goes
to Medium High, and then ends
on Medium heat to dry large
loads of mixed fabrics and items.
Shirts, blouses,
permanent
press, synthetics,
lightweight items
Wrinkle
Control
Damp Dry Signal
Wrinkle
Prevent w/
Steam
Static Reduce
Uses a stepped drying
temperature from Medium to Low
for improved moisture removal
and enhanced fabric care. Cycle
is designed to help reduce
wrinkles.
Undergarments,
blouses, lingerie,
performance
wear
Delicates Damp Dry Signal
Wrinkle Prevent †
Static Reduce
Uses a stepped drying
temperature from Medium to Low
to gently dry delicate items.
* Extended high-heat drying cycle intended to help sanitize items such as sheets and towels. This cycle is not recommended for all fabrics.
For best results, this cycle should be run to completion to ensure sanitization and do not interrupt cycle.