manualshive.com logo in svg

Maytag AMV1162AAB/W/Q/S, Сервисная инструкция

Поделиться
Скачать
Maytag AMV1162AAB/W/Q/S Скачать руководство пользователя страница 39

Disassembly Procedures

To avoid the risk of electrical shock, personal injury or
death; disconnect power to oven and discharge
capacitors before following any disassembly procedure.

©2004 Maytag Services

16023056  Rev. 0

39

W AR NIN G

!

Magnetron Thermal Fuse

NOTE:

Thermal fuse is not resettable.

1. Disconnect power to oven and remove control panel,

(see "Control Panel" procedure).

2. Discharge high voltage capacitor, (see "High Voltage

Capacitor" procedure).

3. Remove outer case, (see "Outer Case" procedure).
4. Disconnect and label wire terminals.
5. Remove screw securing thermal fuse to cooling fan.
6. Replace and reassemble in reverse order.

Magnetron Thermal Fuse

Fan Motor

Humidity Sensor

The sensor is a plug-in device located in the air exhaust
duct.

Humidity Sensor Removal

1. Disconnect power to oven and remove control panel,

(see "Control Panel" procedure).

2. Discharge high voltage capacitor, (see "High Voltage

Capacitor" procedure).

3. Remove outer case, (see "Outer Case" procedure).
4. Remove screws securing sensor to air duct.
5. Disconnect wire terminal plug and replace with new

sensor.

6. Reassemble in reverse order.

Models AMV5164A**, MMV5165A**, AMV5206A**,

MMV5207A**, JMV8208A**

Oven Thermostat

The oven thermostat is on the air duct assembly.

Thermostat is a resettable thermostat.

1. Disconnect power to oven and remove control panel,

(see "Control Panel" procedure).

2. Discharge high voltage capacitor, (see "High Voltage

Capacitor" procedure).

3. Remove outer case, (see "Outer Case" procedure).
4. Disconnect wire terminals from oven thermostat.

NOTE:

Lift upward on rear corner of air duct to release

oven thermostat.

Содержание AMV1162AAB/W/Q/S


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды