Printed in U.S.A.
Part No. 8528096
© 2001 Whirlpool Corporation
Benton Harbor, Michigan 49022, U.S.A.
Technical specifications
230-240V -50 Hz 1ph 3A max. IPX4 Clothes capacity: 9.1 kg max.
Factory set for NATURAL GAS: Injector size: 2.2 mm Heat input gross: 5.9 kW
European Country:
GB, ES, PT
GR, IT
European Category:
II2H3+
II2H3B/P
Supply pressure (G20):
20 mbar
20 mbar
Factory adjusted pressure:
7.4 mbar
7.4 mbar
With LPG conversion kit: Injector size: 1.25 mm Heat input gross: 6.4 kW
European Country:
GB, ES, PT
GR, IT
European Category:
II2H3+
II2H3B/P
Butane supply pressure (G30):
28-30 mbar
30 mbar
Adjusted pressure:
N/A
N/A
Propane supply pressure (G31):
37 mbar
30 mbar
Adjusted pressure:
N/A
N/A
NOTE: Conversion kit : From Natural Gas to LP Gas : Whirlpool Part No. 279918.
Manufacturer : Whirlpool Corporation, Benton Harbor, Michigan 49022, USA.
Moving dryer to a new location?
Check with your gas supplier or dealer to confirm that your dryer is equipped with
the correct burner for the particular type of gas in your new location. Burner
information is specified on the model/serial rating plate.
Shut off electrical
supply to dryer.
Unplug power
supply cord and tape
it securely to dryer.
Shut off gas supply
valve in the gas
supply line.
Disconnect gas
fittings from dryer and
cap gas supply line.
Tape end of dryer gas
pipe.
Tape top
to cabinet.
Tape door to
front panel.
Turn leveling
legs all the
way in.
Slide dryer onto cardboard or hardboard
before moving it across the floor to
prevent damaging floor covering.
