![Maytag Commercial MDG17CS Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/maytag-commercial/mdg17cs/mdg17cs_installation-instructions-manual_1751218010.webp)
10
Maintenance instructions:
■
Clean lint screen after each cycle.
■
Removing accumulated lint:
•
From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
•
From the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
MAINTENANCE INSTRUCTIONS
If dryer does not operate, check the following:
■
Electric supply is connected.
■
Circuit breaker is not tripped or house fuse is not blown.
■
Door is closed.
■
Controls are set in a running or “ON” position.
■
START button has been pushed firmly.
■
Check that gas supply shutoff valves are set in open position.
If you need assistance:
Contact your authorized Maytag Commercial Laundry distributor.
When you call, you will need the washer model number and serial
number. Both numbers can be found on the serial-rating plate
located on your appliance. Or visit:
www.MaytagCommercialLaundry.com.
220-240V~50Hz 1ph 3A max. IP24 Clothes capacity: 9.0 kg max.
European Country:
CH, CZ, CY, ES, GB, GR, HR,
IE, IT, PT, SI, SK, TR
0.562703 m
3
/hr
30 mbar
37 mbar
30 mbar
28-30 mbar
N/A
N/A
N/A
N/A
N/A
7.4 mbar
7.4 mbar
20 mbar
20 mbar
25 mbar
20 mbar
0.562703 m
3
/hr
II2H3+
II2H3B/P
II2H3+
I2E+
II2H3B/P
AT, CH, CY, CZ, DK, EE, FI, GR,
HU, IT, NO, RO, SE, SK, TR
AT, CH, CY, CZ, DK, EE, FI, GR,
HU, IT, NO, RO, SE, SK, TR
CH, CZ, CY, ES, GB, GR, HR,
IE, IT, PT, SI, SK, TR
European Gas Category:
Gas Flow Rate:
Supply Pressure (G20):
Factory Adjusted Pressure:
European Country:
European Gas Category:
Butane Supply Pressure (G30):
Adjusted Pressure:
Adjusted Pressure:
Propane Supply Pressure (G31):
Factory set for NATURAL GAS: Injector size: 2.2 mm Heat input gross: 5.9 kW
With LP Gas Conversion Kit: Injector size: 1.25 mm Heat input gross: 6.4 kW
With France/Belgium NATURAL GAS conversion kit: Injector size: 1.65 mm Heat input gross: 5.9 kW
FR, BE
European Country:
European Gas Category:
Supply Pressure (G20):
Supply Pressure (G25):
Adjusted Pressure:
NOTE:
Conversion kit : From Natural Gas to LP Gas : Whirlpool Part No. W10233219.
Manufacturer : Whirlpool Corporation, Benton Harbor, Michigan 49022, USA.
Conversion kit : From Natural Gas to Natural Gas - France/Belgium: Whirlpool Part No. W10184947.
TECHNICAL SPECIFICATIONS - GAS DRYER
All manuals and user guides at all-guides.com