Maysun Solar MS M-36 Series, Руководство по установке

Страница: 4 / 17

4
www. maysunsolar. com
Ensure that all connections are securely made with no gap between the contacts. Any gap can
result in electrical arcing that can cause a fire hazard and/ or an electric shock.
Make sure that the polarity of each module or a string is not reversed considering the rest ofthe
modules or strings.
DO NOT artificially concentrate sunlight on these solar modules .
DO NOT use water to extinguish fires of an electrical origin .
DO NOT walk on the modules .
DO NOT disconnect the modules under load to avoid arcs and electrical shocks. If needed cover the
module surface with an opaque cover.
Any module or panel mounting system has limitations on specific inclination required to maintain a specific
System Fire Class Rating.
Where common grounding hardware ( nuts, bolts, star washers, spilt- ring lock washers, flat washers and the
like) is used to attach a listed grounding/bonding device, the attachment must be made in conformance with the
grounding device manufacturer' s instructions.
Common hardware items such as nuts, bolts, star washers, lock washers and the like have not been evaluated for
electrical conductivity or for use as grounding devices and should be used only for maintaining mechanical connections
and holding electrical grounding devices in the proper position for electrical conductivity. Such devices, which were
supplied with the module and evaluated through the requirements in IEC61730 61215, may be used for grounding
connections in accordance with the instructions provided with the module.
Rated electrical characteristics are within ± 10 percent ofmeasured values at Standard Test Conditions of 1000
W/m², 25°C cell temperature and AM 1.5 solar spectral irradiance.
The fire rating of Maysun Solar PV module is valid only when mounted in the manner specified
in the mechanical mounting instructions ofthis installation manual.
The module is considered to be in compliance with IEC61730 61215 only when the module is mounted in the
manner specified by the mounting instructions below.