Installation and Operating Instructions for
ROBA
®
-multiswitch Type 019._00.2
(B.019+002.EN)
29/03/2022 GC/TH/MA/SU
Page 1 of 6
Chr. Mayr GmbH + Co. KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Tel.: +49 8341 804-0, Fax: +49 8341 804-421
www.mayr.com
, E-Mail:
Guidelines on the Declaration of Conformity
A conformity evaluation has been carried out for the product in terms of the EC Low Voltage Directive 2014/35/
EU and EMC Directive 2014/30/EU. The Declaration of Conformity is laid out in writing in a separate document
and can be requested if required.
Guidelines on the EMC Directive (2014/30/EU)
The product cannot be operated independently according to the EMC directive.
Only after integration of the product into an overall system can this be evaluated in terms of the EMC.
For electronic equipment, the evaluation has been verified for the individual product in laboratory conditions,
but not in the overall system.
Guidelines on the Machinery Directive (2006/42/EC)
The product is a component for installation into machines according to the machinery directive 2006/42/EC.
The product can fulfil the specifications for safety-related applications in coordination with other elements.
The type and scope of the required measures result from the machine risk analysis.
The product then becomes a machine component and the machine manufacturer assesses the conformity
of the safety device to the directive. It is forbidden to start use of the product until you have ensured that the
machine accords with the regulations stated in the directive.
Guidelines on the ATEX Directive
Without a conformity evaluation, this product is not suitable for use in areas where there is a high danger
of explosion. For application of this product in areas where there is a high danger of explosion, it must be
classified and marked according to directive 2014/34/EU.
Safety and Guideline Signs
DANGER
Immediate and impending danger, which
can lead to severe physical injuries or to
death.
CAUTION
Danger of injury to personnel and damage
to machines
Guidelines on important points
General Safety Guidelines
DANGER
Danger of death! Do not touch voltage-
carrying lines and components.
DANGER
Danger of burns when touching hot
surfaces
CAUTION
• Danger from devices caused by short-
circuits and earth short-circuits at the
terminals
• Electronic devices cannot be guaranteed
fail-safe.
During the risk assessment required when designing the
machine or system, the dangers involved must be evaluated
and removed by taking appropriate protective measures.
To prevent injury or damage, only professionals and
specialists are allowed to work on the devices. They must
be familiar with the dimensioning, transport, installation,
initial operation, maintenance and disposal according to the
relevant standards and regulations.
Before product installation and initial
operation, please read the Installation
and Operational Instructions carefully and
observe the Safety Regulations. Incorrect
operation can cause injury or damage.
11
