Installation and Operational Instructions for
EAS
®
-smartic
®
s
ynchronous clutch Type 48_._ _5._
Sizes 01
– 2
(B.4.17.1.GB)
25/11/2011 TK/NU/SU
Chr. Mayr GmbH + Co. KG
Tel.: +49 8341 804-0
Eichenstraße 1
Fax: +49 8341 804-421
D-87665 Mauerstetten
http://www.mayr.com
Page 15 of 18
Germany
E-Mail:
General Malfunctions / Breakdowns
Malfunction
Possible Causes
Solutions
Premature clutch release
Incorrect torque adjustment
1)
Set the system out of operation
2)
Check the torque adjustment
3)
Secure the adjusting nut
4)
If the cause of malfunction cannot be found, the clutch
must be inspected at the place of manufacture
Adjusting nut position has changed
Clutch does not release
on overload
Incorrect torque adjustment
1)
Set the system out of operation
2)
Check whether foreign bodies influence the clutch
function
3)
Check the torque adjustment
4)
Secure the adjusting nut
5)
If the cause of malfunction cannot be found, the clutch
must be inspected at the place of manufacture
Adjusting nut position has changed
Running noises in normal
operation
Insufficient clutch securement
1)
Set the system out of operation
2)
Check the clutch securement
3)
Check the screw tightening torques
4)
Check the torque adjustment and that the adjusting nut
sits securely
5)
If the cause of malfunction cannot be found, the clutch
must be inspected at the place of manufacture
Loosened screws
Loosened adjusting nut
mayr
®
will take no responsibility or guarantee for replacement parts and accessories which have not been delivered by
mayr
®
, or for damage resulting from the use of these products.
