MP7949 12V Air Compressor
www.maypole.ltd.uk
3
USE OF ACCESSORIES
Remove the required accessories from the accessory
compartment.
FITTING THE ACCESSORIES
Your inflator is supplied with the standard tapered nozzles,
valve adaptor and the needle inflator nozzle, these are located
in a recess at the end of the unit.
• To use the
Quick Coupler, make sure that the lever is in the
up position.
• Place the valve adapter over the stem of the inflation needle
or tapered nozzle.
• Press the lever on the valve adapter down to lock it in place.
• Place the inflation needle or tapered nozzle into the item to
be inflated.
OPERATING THE COMPRESSOR
WARNING: Do not operate the compressor when the car
engine is running.
Note: Make sure that your 12 Volt accessory socket is live. On
some vehicles the accessory socket may only become live
when the ignition key is in the accessory position.
WARNING: Never leave compressor running
unattended, it can burst car tyres and other items.
To use your inflator:
•
Before use, check the manufacturers recommended
tyre pressures for the vehicle.
• Plug the 12Vdc vehicle connector ⑨
into the vehicle
accessory socket. The LED light will be powered.
• Connect the
quick coupler and an accessory if required,
to the item to be inflated, making sure that the lever of
the coupler is in the down position to lock it in place.
• To start the
compressor press the main switch
①
to
the on position.
• When the item is inflated as required
or to stop the
inflator at any time press the main switch
①
to the off
position.
Note:
You may notice the actual pressure reading may
drop after a couple of seconds, this is normal.
• Remove the
quick coupler and/or accessory from the
inflated item and the 12 Volt connector from your
vehicle's 12 Volt accessory socket.
USING THE INFLATOR AS A PRESSURE GAUGE
• Connect the
quick coupler to the item to be checked.
• The
gauge will display the items pressure.
5. OPERATION
OPERATION
