Mayer TR 4103, Инструкция по эксплуатации

Страница: 54 / 70

54
7 Machine malfunction
In order to eliminate the risk of property damage and personal
injuries in the event of machine malfunction and during
corrective action, the following regulations must be strictly
followed:

Please do not attempt correcting a malfunction unless you
are fully qualified to undertake the required action.

Consult the chapter on h ealth and safety instructions.

While machine malfunction is being corrected, the following
specific hazards must be considered:

An inadvertent turning on of the power supply can cause
severe personal injuries or property damage.

In unsecured manual operation mode the risk of injury due
to the crushing or squeezing of body parts is considerably
increased.
1. Malfunction procedures
Should any malfunction occur during the operation of the
machine, please follow the procedure set forth below:
1. Stop the machine immediately by pressing the STOP button
or by activating the “Emergency OFF” button, as required by the
situation.
2. If rendered necessary to secure the safety of people or the
machine / equipment, disconnect the machine without delay
from the power network.
3. Failure search > if required, this task must be performed by
qualified personnel only.
4. Troubleshooting > if required, this task must be performed by
qualified personnel only.
5. The machine can be started again.