Mayer 6160 Big Bale Breaker, Руководство по эксплуатации

Страница: 30 / 35

29
3. Cleaning
No high-pressure cleaner or hose must be used when cleaning
the machine. The electrical system or mechanical bearings
could get damaged.
4. Maintenance Schedule
Description Time
Check the functioning of the safety equipment. Daily
Clean the machine. Daily
Visual check of the electric power supply and the plug Daily
Check the break-up system for any damage or soiling. Daily
Check the "scraping chain" tension. Daily
It may be possible for the chain to be lifted at the centre
of the ground by a minimum of 3 cm and a maximum of
5 cm. If there is greater play, set the chain tighter by
tightening the adjustment bolts on the bottom (24-er
wrench). To do so, loosen the nuts and adjust the bolts
evenly on both sides. Then retighten the nuts.
Spray the pump rod of the hydraulic cylinder with
silicon spray, allow to dry ten minutes, after which it is
again ready for use. After approx. 100
bales are
processed
Check condition of hydraulic hoses and replace if
necessary 5 Annual
Check to be sure the safety instructions are
undamaged. Weekly
Check the hydraulic system for any leakage as well as
for the filling height of the oil tank. Weekly
Check the chain and chain wheels for wear. Replace
both if the chain can no longer be retightened. Weekly
With chain oil, such as Mobil Chain Lube Weekly
Grease all the bearings with lubricating nipples. Annually
Complete cleaning of the Big Bale Breaker after ending
the season and lubrication of the "scraping chain" Annually