![MAY FILIUS Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/may/filius/filius_operating-instructions-manual_1747085008.webp)
Maintenance and cleaning
1. Maintenance and cleaning should only be done by official MAY dealers.
2. Cleaning the canopy: Use a soft brush to remove dirt from the canopy, or use a high-pressure hose
(max. 30° C, max. 30 bar, min. 30 cm distance between nozzle and canopy) and CleanoMay,
art. no. 350848. Afterwards rinse well with clear water so no soap residues remain on the fabric.
If not cleaned properly, the canopy fabric may get damaged.
• Follow our cleaning instructions for cleaning your parasol.
3. The MAY company will be pleased to overhaul your parasol and clean the canopy fabric for you.
However, this is only possible off-season, i.e. from October to December.
4. Please contact your local retailer to clarify the transport to the May company.
5. Please keep in mind, the lead time for spare canopies and other spare parts is shorter during winter
than in spring and summer time.
Caution
3. Store the parasol away from mice.
Mice like to gnaw on textiles. This causes material damage.
If the parasol is not protected from mice, they may damage the canopy. Please always check
each storage to make sure mice will not get in.
• Do not store a parasol in lying position on the floor.
• Cross arm racks (no connection to the ground) that are doweled into the wall are a good
solution, as long as the distance to the ground is big enough, so mice cannot climb up.
• A parasol that is stored in vertical position is protected from mice, as they cannot climb up
the centre pole.
Caution
page 14 of 16 Deutsch /
English
/ Français
Stand 36-2428
Stand 36-2428
Deutsch /
English
/ Français
page 15 of 16
Assembly: Tools and aids
This chapter helps the technician to get optimally prepared. Use the following checklist to guarantee a
smooth and professional assembly. All items required are listed below.
Depending on individual circumstances it may be helpful to have your regular tools and aids available as
well.
Assembly:
• 14 mm hexagon key (Allen key, supplied with the delivery)
• cordless drill (charged, with spare battery if possible)
• T 30 bit, suitable for the cordless drill
• MAY- setup aid (article no. 352040) or a chair
• soft mat / carpet
• MAY protective gloves (supplied)
• torque wrench 210 Nm, suitable hexagon key, 14 mm
• extension for a 14 mm hexagon key, minimum length 25 cm
Only in case of theft lock:
• cordless drill (charged, with spare battery if possible)
• centre punch and 200 g hammer
• spiral drill, sizes Ø 5 mm, Ø 8 mm, Ø 11 mm and Ø 12.5 mm
Cleaning:
• broom suitable for cobblestone
• dustpan and brush
• cleansing cloth and CleanoMay (cleaner, article no. 350848) for aluminium mast
(important in case of rain)
• do not use thinner for cleaning
• bear in mind that the packaging must be disposed after assembly