Stand 30-2032
page 2 of 4
If the side clamps are monted wrong way round, the canopy
fabric can get scoured. No liability.
A wrongly mounted holder will, in the course of time, damage the fabric.
The side clamps of the side sheet holder must face the ground.
4.
Turn the eyelet screw clockwise until the holder is clamped tight on the spoke.
5.
Tighten the M6 nut clockwise, so that the eyelet screw cannot become loose.
6.
Hook the tensioning hook back onto the telescopic shaft and press the cap back on. If the
cap doesn’t fit properly, just turn it the other way round.
Connecting the form rods
1.
Extra long rods are fitted into each other as shown below.
side clamps facing
downward
ref. 3
eyelet screw
M6 nut
ref. 4 and 5
side sheet
holder
spoke
Attention
