Flip-Up Transport Position
QD2 TOOLBAR MOUNT STALK STOMPER
TRANSPORT POSITION
Flip-Up Transport Position (Toolbar Mount Only):
1) Pull down on Lock Pin Assembly to release Stalk Stomper Shoe
2) Place front mounting pin in upright position
3) Pull up until Lock Pin Assembly snaps into place
PAGE 4 OF 5
120 Eastgate Drive SE
PO Box 7
Hutchinson, MN 55350
1-800-788-6483
1-320-587-2322
1-320-587-6112 (Fax)
WWW.MAYWES.COM
Doc #: 10213_B
