
Chop’n Slice Plus
EN
11
the functional lid must rest on the
collecting container without any
gaps. Twist the functional lid back
and forth slightly if necessary.
4. Use one hand to hold the collect-
ing container firmly and use your
other hand to hold the functional
lid firmly.
5. Twist the functional lid and col-
lecting container back and forth in
opposite directions to chop up the
food (
Picture I
). Tilt the product to
the sides from time to time so that
it is chopped up evenly.
6. Open the functional lid and care-
fully remove the double blade.
7. Take the food out of the collecting
container or keep it in there. Fi-
nally, seal the collecting container
shut with the functional lid (without
the double blade).
CLEANING AND
STORAGE
Please Note!
■
Do not use any sharp or abrasive
cleaning agents or cleaning pads
to clean the product. These may
damage the surfaces.
Clean all used accessories after each
use to prevent the formation of
germs.
• Take apart the used accessories
and clean them with detergent
and warm water. Although they
can be cleaned in the dishwasher,
frequent cleaning of the blades in
the dishwasher may impair their
sharpness. It is therefore recom-
mended that they are rinsed by
hand.
• Remove food residues on the
punch on the large functional
lid (
5
) with the cleaning comb (
8
).
• Allow all parts to dry completely or
dry them with a tea towel before
storing them away.
• Apart from the finger guard (
3
)
and the storage lid (
6
), all acces-
sories can be stored in the large
collecting container (
4
). To do this,
the slicer (
11
) is placed right at
the bottom. The cleaning comb
is clamped into the holder in the
large functional lid (
Picture J
).
• Store the product in a cool and
dry place protected from dust and
direct sunlight out of the reach of
children and animals.
L
Some types of fruit and
vegetables, e.g beetroot, may
stain the plastic parts. This
is normal and quite safe and
does not constitute grounds
for warranty claims.
DISPOSAL
Dispose of the packaging
material in an environmentally
friendly manner so that it can
be recycled.
The product should also be
disposed of in an environ-
mentally friendly way if it is no
longer going to be used.
03937_Inlay_210x138_de-en-fr-nl_V1.indb 11
03937_Inlay_210x138_de-en-fr-nl_V1.indb 11
18.05.2020 11:08:55
18.05.2020 11:08:55