EN
12
There is a danger of burns from
battery acid.
■
Do not exert too much pressure
with the device! There is a danger
of injury!
■
Do not use the device with or on:
○
injuries and areas of swelling;
○
acne, birthmarks and warts;
○
infected, inflamed, (sun-)burnt,
irritated or very sensitive skin;
○
skin which has only just had
cream, oil or other combustible
or alcoholic products applied
to it.
If you are unsure whether the
device may be used, consult
a doctor.
■
Do not use the device if it is
damaged.
■
Test the device first on your arm
or leg. If skin irritations occur,
stop using it!
NOTICE – Risk of Damage to
Material and Property
■
No liquid must get into the device.
Do not immerse in water! Never
use while bathing or showering!
■
Remove a dead battery from the
device immediately.
■
Use only the battery type speci-
fied in the technical data.
■
Always replace all batteries
together. Never use batteries of
different types or brands, or bat-
teries with different capacities.
■
Take the batteries out of the device
when they are dead or if you will
not be using the device for a pro-
longed period. This will prevent
any damage caused by leaks.
■
Protect the device from heat,
flames, direct sunlight, sub-zero
temperatures, persistent mois-
ture, wet conditions and impacts.
■
Never immerse the device in wa-
ter or other liquids! They are only
splashproof.
■
Do not make any modifications
to the device. Do not attempt to
repair it yourself or to replace any
individual parts. In the event of
any damage, contact the custom-
er service department.
■
Use only original accessories from
the manufacturer in order to guar-
antee that there is no interference
that may prevent the device from
working and to avoid possible
damage.
INSERTING /
REPLACING BATTERIES
Before inserting the batteries, check
whether the contacts in the device
and on the batteries are clean, and
clean them if necessary.
1. Make sure that the device is
switched off.
2. Pull out the handle (
6
) of the hair
trimmer sufficiently far that it
can be detached from the main
unit (
10
).
3. On the bottom of the main unit,
twist the cover of the battery
compartment anticlockwise and
take it off.
4. Insert two 1.5 V batteries, AA into
the battery compartment. Make
sure the polarity (+ / –) is correct.
5. Close the cover of the battery
compartment clockwise. When
you do this, make sure that the
cover of the battery compartment
sits in the recesses which are
provided for it. The cover must
be heard to engage in place.
Replace the batteries when the pow-
er of the device starts to wane.
04523_DE-EN-FR-NL_210x135_V1.indb 12
04523_DE-EN-FR-NL_210x135_V1.indb 12
20.09.2021 16:10:35
20.09.2021 16:10:35