Air Purifier and Fan
EN
13
NOTICE – Risk of Damage to
Material and Property
■
Lay the connecting cable in such
a way that it does not become
squashed or bent and does not come
into contact with hot surfaces.
■
Switch off the device and pull the
mains adapter out of the plug socket
if an error occurs during operation or
before a thunderstorm.
■
Always switch off the device first
before the mains adapter is pulled out
of the plug socket. When you pull the
mains adapter out of the plug socket,
always pull on the mains adapter and
never the mains cable!
■
Never pull or carry the device by the
connecting cable.
■
Protect the device from other heat
sources, naked flames, sub-zero
temperatures, persistent moisture and
impacts.
■
Do not lay or place heavy objects on
the device.
■
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
FUNCTIONAL OVERVIEW
The device has two different fans: an
adjustable one with three speed settings
and one in the main unit that is used for
purifying the air. Both fans can be operat-
ed either together or separately from one
another.
Fan / Speed
The
Fan / Speed
button (
4
) is used to
switch on the top, adjustable ventilation
fan (
8
). It starts operating on the lowest
setting (
Low
). The corresponding control
lamp (
6
) lights up. The speed can be ad-
justed by pressing the
Fan / Speed
but-
ton several times. You can tell which level
is set from the control lamps (
LowMedi
umHigh
).
The ventilation fan can be detached from
the main unit by pulling on the rear edge
and set up at an angle of up to 90°.
To switch off the ventilation fan, the
Fan / Speed
button needs to be pressed
for approx. 3 seconds. The control lamps
go out.
Air Purifier
The
Air Purifier
button (
5
) is used to
switch on the air purifier fan (
2
) in the
main unit. The
Purify
control lamp (
7
)
lights up. Air is then sucked in, purified
using the HEPA13 filter (
10
) and then
emitted upwards.
To switch off the air purifier fan, press
the
Air Purifier
button again. The
Purify
control lamp goes out.
L
To distribute the filtered air bet-
ter, we recommend switching on
both fans.
USE
Please Note!
■
The device must have clearance of at
least 30 cm above it and to all sides
and be placed on a dry, even and
solid surface.
■
Make sure that the HEPA13 filter is
fitted correctly before using it.
■
Only connect the mains adapter to a
plug socket that is properly installed
and matches the technical data of
the mains adapter. The plug socket
must also be readily accessible after
connection so that the connection to
the mains can quickly be isolated.
■
Do not operate the device unsuper-
vised so that you can intervene imme-
diately if there are any faults.
01946_Inlay_DE-EN-FR-NL_A5.indb 13
01946_Inlay_DE-EN-FR-NL_A5.indb 13
01.11.2021 13:10:36
01.11.2021 13:10:36
