90
Bruksanvisning
Kylskåpets temperatur kan regleras manuellt med vridreglaget.
Siffran på knappen anger dock inte temperaturen direkt.
Ju större antal, desto lägre blir inomhustemperaturen. 0 står för
off. Ställ vredet i läge 4 om kylskåpet används normalt, i läge 4-7
om en lägre inre temperatur önskas; i position 1-4, å andra sidan,
om en högre temperatur önskas.
FÖRPACKNING OCH PLACERING
1. Packa upp, packa om och transportera.
När du packar upp eller packar om produkten, kom ihåg
placeringen av varje tillbehör till apparaten och kontrollera den
noga innan du transporterar den.
2. Lyft eller dra inte i dörren eller dörrhandtaget under transport.
3. När du rör dig får enheten inte lutas mer än 45 grader
(vinkeln från vertikal riktning).
Undvik starka vibrationer och stötar.
UNDERHÅLL
Apparaten måste underhållas och rengöras regelbundet. Koppla bort apparaten
innan du rengör den för din säkerhet.
1. Interiörunderhåll.
Rengör insidan av apparaten med rent vatten eller neutralt rengöringsmedel.
Skrubba enheten med rent vatten och torka av den med en torr trasa.
2. Underhåll av dörrpackningen.
Dörrpackningarna kan lätt skadas om de smutsas av fläckar som olja, sås etc.
3. Underhåll av utsidan.
Torka av dammet med en torr trasa, rengör vid behov med ett neutralt
rengöringsmedel.
4. Enheten är utrustad med en skruvlampa eller LED-interiör med lång livslängd.
(Skruvlampan kan bytas ut av proffs. LED med lång livslängd kan inte bytas ut).
AVFROSTNING
Extrem isuppbyggnad påverkar kylningen av apparaten och ökar energiförbruk-
ningen. Tining är därför nödvändig om isen är 5 mm tjock. Processerna för manuell
avfrostning visas enligt följande: ta bort all mat från facket; ta bort lådorna och hyllor-
na; koppla bort den elektroniska nätsladden; öppna dörrarna och vänta på tiningen.
Torka av vattnet med en torr trasa.
VARNING
Använd inte någon annan utrustning eller metod för att underlätta avfrostningen.
Detta kan förstöra kylsystemet.
AVSLUTA ENHETEN
Efter ett strömavbrott, även på sommaren, kan kylskåpet normalt hålla mat i flera timmar.
1. Stäng av vid strömavbrott.
Efter strömavbrott, lägg inte extra mat i apparaten och minska inte luckans öppning.
Om du känner till strömavbrottet i förväg, gör isbitar i en behållare och placera den på
toppen av kylskåpet.
2. Uppsägning under semestern.
Ta bort mat som förstörs lätt om du inte använder kylskåpet på ett tag. Stäng
dörren tätt.
Ta bort all mat om du inte kommer att använda kylskåpet under en längre tid.
Rengör och torka av apparaten efter avfrostningen och låt dörren vara öppen.
5
4
INSTRUCTION FOR USAGE
Unpack , repack and carry
Please memorize the position of each accessory of the appliance
when unpack it, repack the product and check it carefully before
transportation.
Do not lift or pull the door or the door handle during transportation.
When moving, the appliance can not be sloped over 45 degrees
(the angle to the vertical direction). Please avoid strong vibration
and hit.
PACKING AND MOVING
1.
2.
3.
The appliance should be maintained and cleaned frequently. For your safety,do
please pull the plug out of the socket before the cleaning.
Interior maintenance
Clean the interior of the appliance with clean water or neutral abluent.Scour it with
clean water and wipe it with a piece of dry cloth.
Maintenance of door gasket
It is easy to damage if the door gaskets are polluted by the stain like oil, sauce and
etc., so it is better to clean them carefully.
Outer maintenance
Wipe the dusty with a piece of dry cloth ,clean it with neutral abluentif necessary.
MAINTENANCE
1.
2.
3.
Do not use any electronic equipment inside the appliance.
Warning
The refrigerator should be located in a completely flat surface , Leave 5~10 cm
between each side of the appliance and the wall, and leave 30 cm between the top
of the appliance and the ceiling.
Choose a location which is not exposed to sunlight ,
high temperature or humid , as humidity maycause stain.
Pulled out the bottom panel before installation.
The appliance can be adjusted by rolling its two legs in
front the bottom when it is unstable. Rolling in clockwise
can rise up the machine.
The location should be firm and flat. An un-securely
position may cause noise and libration:
(a)The noise may be increased if the floor is not firm.
(b) Put a sheet under the appliance for solving the heat
emission if you need to locate it onto a carpet.
Make sure the adjustable legs are clung to the floor,
and set the appliance slope backward slightly for keeping the doors closed tightly.
PLACEMENT OF FOOD
INSTALLATION INSTRUCTIONS
OPERATION INSTRUCTIONS
1.
2.
3.
4.
5.
6.
There should always be some space between items inside for air circulation.
Food should be
to avoid becoming
dry or with odour.
kept in sealed package
Hot food should be cooled down before placing into the
appliance. Otherwise, interior temperature and electronic
consumption will increase.
Reduce the frequency of door opening can efficiently low
down the electronic consumption.
1.
2.
3.
4.
The temperature of refrigerator can be controlled manually by the
knob. However, the number shown on the knob does not directly
represent the temperature. Instead, the larger the number is, the lower
the interior temperature will be. 0 stands for off. Turn the knob to state
4 when it is normal used, turn it to the state during 4-7 if a lower interior
temperature is required; contrarily, to the state during 4-1, when a
higher one is needed.
5
4
INSTRUCTION FOR USAGE
Unpack , repack and carry
Please memorize the position of each accessory of the appliance
when unpack it, repack the product and check it carefully before
transportation.
Do not lift or pull the door or the door handle during transportation.
When moving, the appliance can not be sloped over 45 degrees
(the angle to the vertical direction). Please avoid strong vibration
and hit.
PACKING AND MOVING
1.
2.
3.
The appliance should be maintained and cleaned frequently. For your safety,do
please pull the plug out of the socket before the cleaning.
Interior maintenance
Clean the interior of the appliance with clean water or neutral abluent.Scour it with
clean water and wipe it with a piece of dry cloth.
Maintenance of door gasket
It is easy to damage if the door gaskets are polluted by the stain like oil, sauce and
etc., so it is better to clean them carefully.
Outer maintenance
Wipe the dusty with a piece of dry cloth ,clean it with neutral abluentif necessary.
MAINTENANCE
1.
2.
3.
The appliance is equipped with a screwing lamp or a long life LED interior light.
(Screwing lamp can be replaced by professionals.Long life LED is non-replaceable).
4.
Do not use any electronic equipment inside the appliance.
Warning
The refrigerator should be located in a completely flat surface , Leave 5~10 cm
between each side of the appliance and the wall, and leave 30 cm between the top
of the appliance and the ceiling.
Choose a location which is not exposed to sunlight ,
high temperature or humid , as humidity maycause stain.
Pulled out the bottom panel before installation.
The appliance can be adjusted by rolling its two legs in
front the bottom when it is unstable. Rolling in clockwise
can rise up the machine.
The location should be firm and flat. An un-securely
position may cause noise and libration:
(a)The noise may be increased if the floor is not firm.
(b) Put a sheet under the appliance for solving the heat
emission if you need to locate it onto a carpet.
Make sure the adjustable legs are clung to the floor,
and set the appliance slope backward slightly for keeping the doors closed tightly.
PLACEMENT OF FOOD
INSTALLATION INSTRUCTIONS
OPERATION INSTRUCTIONS
1.
2.
3.
4.
5.
6.
There should always be some space between items inside for air circulation.
Food should be
to avoid becoming
dry or with odour.
kept in sealed package
Hot food should be cooled down before placing into the
appliance. Otherwise, interior temperature and electronic
consumption will increase.
Reduce the frequency of door opening can efficiently low
down the electronic consumption.
1.
2.
3.
4.
The temperature of refrigerator can be controlled manually by the knob. However,
the number shown on the knob does not directly represent the temperature. Instead,
the larger the number is, the lower the interior temperature will be. 0 stands for off. Turn
the knob to state 4 when it is normal used, turn it to the state during 4-7 if a lower interior
temperature is required; contrarily, to the state during 4-1, when a higher one is needed.
Содержание 21764
Страница 98: ...98...