CAUTION:
1. The appliance is not intended to be operated by means of an external timer or separate
remote-control system.
2. Make sure your hands are dry when plugging in and unplugging appliance.
3. Ensure all the parts are correctly mounted before switching on the appliance.
4. Do not immerse the appliance in water or any other liquid.
5. Always remove the plug after use.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
1. Carefully read all instructions before operating the appliance and save for future reference.
2. Remove and safely discard all packing materials and promotional labels before using the
appliance for the first time.
3. Fully unwind the power cable before use.
4. Do not let the power cord hang over the edge of a bench or table, touch hot surface or
become knotted.
5. To protect against electric shock, do not immerse the power cord, plug or appliance in water
or any other liquid, unless it is recommended in the cleaning instructions.
6. The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning the use of the appliance, by a person
responsible for their safety.
7. It is recommended to inspect the appliance regularly. Do not use the appliance if the supply
cord, plug, connector or appliance becomes damaged in any way.
8. The appliance is for household use only. Do not use this appliance for any other than its
intended use. Do not use in moving vehicles or boats. Do not use outdoor. Misuse may cause
injury.
9. Always switch off at the power outlet and unplug at the power outlet when the appliance is
not use.
10. Before cleaning,always turn the appliance to the OFF position.switch off at the power outlet
and remove the power cord, if detachable, from the appliance and allow all parts to cool.
11. Do not place this appliance on or near a heart source, such as a hot plate or oven.
12. After adding water to the water tank, do not tilt or knock over the appliance wh en you put or
move it. If you want to move, please drive it at side, in order to avoid spilling the water.
OPERATING INSTRUCTIONS
1. Misting dish
2. Front guard
3. Fan blade nut
4. Fan blade
5. Rear guard nut
6. Rear guard
7. Motor
8. Adjusting knob
9. Base
10. Base nut
11. Misting outlet
12. Mist tube inlet
13. Mist tuber
ASSEMBLY AND INSTALLATION
1. Open the packing and ensure all the parts are present.
2. Assemble the Chassis components.
3. Place the main body onto the assembled Chassis.
4. Insert the stanchion into the opening of the top of the main body and secure,using the
stanchion screw.
5. Affix the motor to the support pole and connect to the top of the stanchion.
6. Place back guard onto the motor and secure with the rear guard screw.
7. Place the fan blade and secure with the fan blade screw,by turning in an anti-clockwise
direction.
8. Place the hoop net over the front guard and connect to the back guard.
9. Tighten the hoop net.
Содержание 20779
Страница 19: ......
