For additional product information please visit www.AIRXCEL.com
AIRXCEL, INC. - RV Products Division / MAXXAIR
3050 N. St. Francis St. • Wichita, KS 67219 • 316-832-3400
REMOTE CONTROL OPERATING GUIDE
WIRELESS REMOTE CONTROL FOR
MAXXFAN
®
Plus
MODELS: 4500K • 4501K
FAN ON & POWER OFF
-
Press this button:
• To start the fan
• To turn the fan off
• To exit Auto Mode
VENT LID POSITION
-
Press this button to open or close the vent lid
• While the fan is running in Manual Mode press once to close the vent lid and
enter “Ceiling Fan” Mode.
NOTE:
This button is not active in Auto Mode. If the fan loses 12volt RV power
or power is removed from the fan, use the knob located at the ceiling to manually
open or close the vent lid if desired.
AIR EXHAUST / INTAKE
-
Press this button to reverse the fan from intake
or exhaust
NOTE:
In Auto Mode, the fan direction is automatically positioned to Exhaust, but
may be overridden and changed to Intake by depressing this key.
FAN AUTO MODE
-
Press this button to enter Auto Mode
• Auto Mode allows the fan lid to automatically open and the fan motor to
operate as dictated by the thermostat set point temperature. Once the cabin
temperature cools and reaches the set point temperature, the fan lid will close
and the fan motor will shut off.
• Pressing this button while in Auto Mode will shut off Auto Mode, close the vent lid
and shut off the fan motor.
THERMOSTAT SET TEMPERATURE
TEMP +
~ Press this button to increase the Set Temperature for Auto Mode.
TEMP -
~ Press this button to decrease the Set Temperature for Auto Mode.
NOTE:
The thermostat ranges is from 29°F to 99°F or -2°C to 37°C. To change from Fahrenheit to Celsius on
the temperature display, press and hold both set temperature keys simultaneously.
FAN SPEED
Fan Speed +
~ Press this
button to increase the fan
speed. The fan has ten
speeds.
Fan Speed -
~ Press this
button to decrease the fan
speed. The fan has ten
speeds.
NOTE:
When the fan speed
reaches either the maximum
or minimum speed, the fan
will respond with 2 quick beep
sounds to indicate this.
LOW BATTERY
INDICATOR
• When the battery is at full
charge, three black power
bars are displayed.
• One or zero power bars
displayed indicates the batteries need replacement.
TRANSMISSION SIGNAL
• This symbol is displayed on the screen when any button is pressed to indicate the signal was transmitted
to the fan.
• A beep sound from the ceiling unit indicates the signal from the remote control was received by the fan.
CEILING FAN
SET
TEMPERATURE
TRANSMIT
LOW BATTERY
INDICATOR
AIR DIRECTION
INDICATOR
CEILING FAN MODE
FAN SPEED
VENT LID
POSITION
FAN OFF
INDICATOR
VENT LID IN
AUTO MODE
FAN ON
INDICATOR
ROOM
TEMPERATURE
AUTO MODE
INDICATOR
ENJOY your new
MAXXFAN
®
in
ALL WEATHER CONDITIONS
with the
NEW FANMATE
®
featuring
EZ
Clip
TM
Hardware for
TOOL FREE INSTALLATION. Visit
AIRXCEL.com
for details.
Remove protective film from
Display Screen
