circulation) may get lower readings with this monitor that with
a blood pressure monitor that is used on the upper arm.
Please consult your physician to determine if your wrist blood
pressure accurately reflects your actual blood pressure.
Blood pressure measurement determine with the unit are
equivalent to those obtained by a trained observer using the
cuff / stethoscope auscultation method. Within the limits
prescribed by the American National Standard for Electronic or Automated Sphygmomanometers.
4. Device description:
A.Name of the parts
B.Description of display symbols
5.Changing batteries
Remove the battery cover at the lower side of the unit and insert
batteries into the battery compartment as shown, taking extreme
care that the polarities + and - are observed.
Important notice: Your might encounter difficulties to take the
batteries out. If so, use a hard and tiny object such as a pen or
others for help.
6. Attaching pressure cuff
A. Wrap the pressure cuff around the wrist.
a. the display of the unit should be placedon the palm side of the wrist.
b. the wrist should be bare.
B. Fasten the pressure cuff snugly.
a. do not pull strongly on the pressure cuff.
b. do not make the pressure cuff too tight.
7. Correct measurement position
It is extremely important for the measured values, that the cuff is at the same height of the heart.
Higher or deeper position will give deviations from the true value.
Measurement while sitting down:
