4
Maxx Air Portable Evaporative Cooler
1.0
Introduction
•
Your Maxx Air was tested 3 ways. Your unit was
tested for
1. Maximum air flow at operating static pressure.
Only Maxx Air is
tested in operating conditions
with 2.
Water
and 3.
Electricity
before it is shipped.
•
Maxx Air is
easy to operate
– needs only tap water and electricity to operate.
•
Maxx Air is
easy to move
– roll your Maxx Air to the area you
want to cool. Maxx Air comes standard with straight and swivel
/ lock casters which make moving your Maxx Air a breeze.
1.1
Quick Start
– Your Quick Start Information is located inside the
information packet shipped with your unit.
Look on the front of your Maxx Air in a plastic sleeve.
1.2 Evap-O-Matic – Chemical Water Treatment. Operate your unit 2
weeks – flush out old water – add clean water – then add Chemical Water
Treatment tablet. Note; Tablet makes water foam which can cause unit to
spit droplets of water temporarily. Foam subsides in 1 – 2 working days.
You can order more tablets by calling 1.800.433.1626
2.0 How Evaporative Cooling Works
Keeping in mind that regular fans only circulate same temperature air - same humidity – your Maxx Air portable evaporative
cooler takes that same existing air, combines it with evaporating water
(which dramatically lowers the temperature
)
immediately relieving hot, dry areas, similar to the conditions when a natural rain storm approaches, the temperature drops
noticeably cooler, because the air is saturated with water. Because your air is now saturated with water it becomes
noticeably cooler. In high humidity areas the temperature will not be as cool – however, the Maxx Air was engineered
efficient
to evaporate perspiration and sweat from employees to keep them cooler.
3.0 Unpacking your new Maxx Air unit
Note: Carefully examine your Maxx Air shipping carton for damage before
opening. If your carton is damaged – notify the shipper immediately!
Your EC48B2 unit was shipped on a wooden skid covered with a cardboard cover
and lid – strapped. First remove the straps then you may lift the whole cardboard
box off the unit and skid. Your Maxx Air must now be lifted off the wooden skid.
4.0 Set-up your Maxx Air unit.
Roll your Maxx Air unit to a level surface and lock the swivel casters to prevent
accidental movement.
Electrical cord for 120V, 20Amp connection.
Note: Standard
¾”
water connection for
utility water source under 60 p.s.i.
How the Maxx Air portable
evaporative cooler works
