Maxwell MW-4001, Инструкция по эксплуатации

Страница: 8 / 38

ENGLISH
8
Note:
- switching on of the repeat modes can be per-
formed from the playback mode, pause or stop
mode.
- to cancel repeat modes, press the (12)
REP
button several times, until “REP”, “REP ALL” or
“RAND” disappear.
Programming the playback of tracks
You can program playback of tracks (maximum
99) in the desired order.
1. In the STOP mode, press the (4)
PROG+10
button once, the flashing “PROG” symbol and
“P01” symbol will appear on the display.
2. Press the buttons (15) / to select the de-
sired track.
3. To store the selected track in memory press
the PROG+10 button, “P02” (6), in which the
next track can be recorded, will appear on the
display (refer to p. 2).
4. You can program up to 99 tracks, when the
number of the memory cells is exceeded,
“FUL” will appear on the display.
5. To playback tracks in the programmed order,
press the button (11).
6. To cancel programmed playback of tracks
press the button (5) , open the lid (7) of the
disc compartment or set the (2) FUNCTION
switch to another position.
TROUBLESHOOTING GUIDE
Improper usage is always the case of trouble or
bad playback. If you consider that there is some-
thing wrong with the unit, check possible causes
in this table.
If you have not managed to solve the problem,
apply to the nearest authorized service center.
Problem Possible cause Solution
Radio
Noise while listening to radio sta-
tions in FM or AM band The station is not tuned Tune the station
FM band: the antenna is not
extended Extend the antenna
АМ band: the unit is not
oriented to the transmitting
station Try to rotate the body of the
player around its axis
The unit does not playback sta-
tions in FM or AM band
The FUNCTION switch is not
set o the RADIO position Set the FUNCTION switch to
the RADIO position
Low volume level Increase volume level
Disc
Disc is not played back The FUNCTION switch is not
set to the CD position Set the FUNCTION switch to
the CD position
Disc is absent or set improp-
erly Check the disc, it should be
placed with its label upwards
Some tracks cannot be played
back Disc is scratched or dirty Wipe the disc with a soft cloth,
do not use the damaged discs
Disc is in its place but tracks can-
not be played back Disc is placed improperly Check the disc, it should be
placed with its label upwards
Disc is scratched or dirty Wipe the disc with a soft cloth,
do not use the damaged discs
Improper disc format Use discs with corresponding
format
4001_NEW.indd 8 4001_NEW.indd 8 15.07.2011 10:54:22 15.07.2011 10:54:22