ENGLISH
13
•
Pull the plug out of the mains socket and let
the iron cool down completely.
STEAM IRONING
The iron is provided with anti-drip valve that stops
water supply, if the soleplate temperature is too
low, and prevents dripping from the soleplate
openings (14). During heating and cooling of
the iron soleplate you will hear characteristic
clicks of the anti-drip valve opening/closing that
indicates its normal operation.
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Make sure that there is enough water in the
water tank (13).
•
Turn the temperature control knob (10) to
set the required ironing temperature: in the
steam operation zone or «MAX» (•••), the
pilot lamp (6) will light up.
•
When the soleplate temperature (14) reaches
the set value, the pilot lamp (6) will go out,
you can start ironing.
•
Turn the continuous steam supply knob (3)
to set the steam generation rate, steam will
be released from the soleplate (14) openings.
•
After you finish ironing set the temperature
control knob (10) to the «MIN» position, and
the continuous steam supply knob (3) to the
position « » (steam supply is off).
•
Pull the power plug out of the mains socket
and let the iron cool down completely.
Attention!
If steam is not released constantly
during the operation, check whether the steam
supply knob (3) is set properly and whether there
is water in the water tank.
BURST OF STEAM
Burst of steam function is useful when ironing
folds and can only be used at high ironing
temperatures (when the temperature control
knob (10) is set to «•••» or «MAX»).
When pressing the burst of steam button (4)
steam will be released from the soleplate.
Note:
•
In order to avoid water leakage from steam
openings, press the burst of steam button (4)
with a 4-5 sec. interval.
VERTICAL STEAM
Vertical steam function can be used only at
high ironing temperatures (that is, when the
temperature control knob (10) is set to «•••»
and “MAX”).
Hold the iron vertically at the distance of 15-30
cm from the clothes, press the burst of steam
button (4) with a 4-5 seconds interval, steam will
be released from the soleplate (14).
WATER SPRAY
•
You can dampen the fabric by pressing the
spray button (5) several times.
•
Make sure that there is enough water in the
water tank (13).
IMPORTANT INFORMATION
•
Vertical steam is not recommended for syn-
thetic fabrics.
•
To avoid fabric burning, do not touch it with
the iron soleplate while steaming.
•
Never steam clothes on a person as the
steam temperature is very high, use clothes
hanger or a stand.
AUTO SWITCH OFF FUNCTION
If the iron remains still for about 30 (±5)
seconds in horizontal position or for about
8 minutes (±1) in vertical position, it is
switched off automatically.
To switch the iron on again just start ironing.
Note: After switching the iron on the preset
soleplate temperature will be restored after
some time depending on the temperature
control knob position.
STEAM CHAMBER CLEANING
To prolong service life of the iron we recommend
to clean the steam chamber regularly, especially
in the regions with hard tap water.
•
Set the continuous steam supply knob (3) to
the position « » (steam supply is off).
•
Fill the water tank (13) till the “MAX” mark
(11).
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Set the temperature control knob (10) to the
maximum soleplate temperature «MAX», the
pilot lamp (6) will light up.
•
When the soleplate (14) temperature reaches
the set value and the pilot lamp (6) goes out,
you can start cleaning the steam chamber.
MW-3018.indd 13
12.02.2014 16:57:45
Содержание MW-3018 BK
