Maxwell MW-2313 VT, Инструкция по эксплуатации

Страница: 9 / 20

ENGLISH
9
•
To remove the attachment, press and hold
the attachment release button (2) and turn
the attachment counterclockwise.
•
Wipe the unit body (4) with a damp cloth and
then wipe it dry.
•
Clean the air inlet grid (5) with a brush.
•
Never immerse the unit into water or other
liquids.
•
Do not use abrasives and solvents to clean
the unit body.
STORAGE
•
Disconnect the unit from the mains and
clean it.
•
Never wind the power cord around the hot
air brush, as this can damage the cord or
the unit body. Handle the power cord with
care, do not pull, twist or stretch it, espe-
cially near the power plug or at the junc-
tion point. Straighten the cord periodically
if it gets twisted during the hot air brush
operation.
•
Keep the unit away from children in a dry
cool place.
DELIVERY SET
Hot air brush – 1 pc.
Brush – 1 pc.
Concentrator nozzle – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Power consumption: 600 W
The manufacturer preserves the right
to change the specifications of the units with-
out a preliminary notification
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim
under the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
IM MW-2313_new.indd 9 23.06.2017 9:28:38