Maxwell MW-2029, Инструкция по эксплуатации

Страница: 9 / 40

9
ENGLISH
HAIR DRYER MW-2029
The hair dryer is intended for hair drying and styling.
DESCRIPTION
1. Operation mode switch ( 0\1\2 )
2.
Body
3.
Air nozzle
4.
Air inlet grid
5.
Foldable hairdryer handle
6.
Hanging loop
ATTENTION!
– After using the hair dryer in a bathroom, disconnect the
power plug from the mains socket, as water closeness is
dangerous even if the unit is switched off.
– For additional protection you can install a residual current
device (RCD) with nominal operation current not exceed-
ing 30 mA into the bathroom mains; contact a specialist
for installation.
SAFETY MEASURES
Before using the unit, read this manual carefully and keep it for
future reference.
Use the unit for intended purposes only, as specified in this
manual. Mishandling the unit can lead to its breakage and cause
harm to the user or damage to his/her property.
•
Before switching the hair dryer on, make sure that your
home mains voltage corresponds to the unit operating
voltage.
•
Do not use the unit outdoors.
•
To avoid fire, do not use adapters for connecting the unit
to the mains.
•
Use only the attachment supplied with the unit.
•
When using the unit, we recommend to unwind the power
cord to its full length.
•
The power cord should not:
–
touch hot objects,
– run over sharp edges,
–
be used for carrying the unit.
•
Check the power cord and power plug insulation integrity
periodically.
•
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Hair spray shall be applied only after hair styling is finished.
•
Do not operate the unit while taking a bath.
•
Never leave the operating unit unattended.
•
Do not touch the unit body, the power cord and power plug
with wet hands.
IM MW-2029_70x130.indd 9 19.01.2018 17:21:29