20
HOW TO INSTALL THE CAMERA
SAFETY AND INSTALLATION TIPS
Do not attempt to open the units with the power adaptor plug connected to avoid any
risk of personal injury.
When installing CCTV camera(s), always follow manufacturer's advice when using
power tools, steps, ladders, etc. and wear suitable protective equipment (e.g. safety
goggles) when drilling holes. Before drilling holes through walls, check for hidden
electricity cables and water pipes. The use of cable/pipe detector is advisable.
The camera is designed for indoor use only, please do not install the camera outdoor.
To prevent a fire or electrical shock hazard, do not attempt to open the housing while
the unit is exposed to water or wet conditions. There are no user serviceable parts
inside. Refer servicing to qualified service personnel. Avoid pointing the camera(s)
directly at the sun or any moving objects that might unnecessarily cause the camera
to record.
Camera Installation
(1) Secure the camera stand on the stable surface.
(2) Mount the camera into camera stand. Adjust the viewing angle and fix the camera tightly.
1.
Place the mounting bracket on the mounting surface as a pattern to mark the holes.
2.
Drill the mounting holes and use the wall plug screws to secure the bracket to the wall.
3.
Fasten the camera to the bracket using the tapping screws.
4.
Hang the camera and plate onto the hanger screws. Arrange cable properly so that it will not block
pan/tile operation.
A
B