Operation instruction
Installation
Turn on the power
Select air speed
[H] for High speed
[L] for Low speed
Note: Heating or cooling air is depending on the user's input system.
Operate the unit at the rated voltage and frequency.
Ensure the expansion bolts
are fixed and hang up the air
curtain, and then fasten the screws.
Fix the installation hook on
the air curtain. (The installation hooks
and screws are put
in the packaging.)
For install on the concrete and brick wall or other hard wall, should measure the place
of the installation screw (see
the installation dimension
), then fix on the wall by M8
expansion bolt, ensure
the out expansion bolt around
13-15mm.
installation hook
After fix the air curtain, connect the water inlet tube and drainage tube (offer by user),
ensure without leakage of water.
User should purchase the relative installation
parts, and the intensity must suitable
for the product weight.
Water inlet
drainage outlet
For a longer model, it's suggested
to add the two hanging hooks. The
product is with hooking hold. User
should buy the hooking parts by
themselves.
M8 screw
bolt
M8 nut
Washer
Fixing part
Adjust diverter of outlet to make better effect according different environment(as shown in
the following pictures)
Air conditioning room:
adjust 0-15 angle to indoor
Air conditioning room
Indoor
Outdoor
Heating room: adjust 0-15
angle to outdoor
Heating room
Indoor
Outdoor
Odor / insect preventing:
adjust 15 angle to outdoor
if for kitchen and mess hall.
Odor/insect preventing
Indoor
Outdoor
drainage outlet