maxwatt MX2000iS Скачать руководство пользователя страница 3

Страница: 3 / 64

ABOUT YOUR GENERATOR

Thank you for purchasing a MAXWATT generator (hereina er referred to as

“the generator”).

This generator is suitable for use on various trade worksites, recrea onal

such as camping and for use as backup power whether residen l or

commercial.

With built-in Pure Sine Wave technology (THD<5%), its perfect for

powering tools, domes c appliances as well as sensi ve electronics.

Please read and understand this manual for instruc ons on start-up, shut

down, opera ons, adjustments, maintenance as well as safety guidelines

before using this product. Please take all possible precau ons to protect

your own safety and that of the people in the immediate vicinity. This

manual is the latest version. Save this manual for future reference.

As this product is con nuously improved and upgraded, the manufacturer

reserves the right to modify this manual without no e. The manufacturer

shall not assume any liability for incorrect informa on contained in this

manual.

This manual is an essen l and important tool for the use of the

generator. When the generator is transferred to new owners, the

manual must be given to the new owners as well.

Some important informa on in this manual will be indicated in the

following way. The owner/ user must pay special a en on to these

instruc ons.

MAXWATT is constantly improving its products. All informa on supplied

in this manual is based on the latest product informa on available at the

me of prin ng. The speci

ﬁc

a ons outlined herein are subject to change

without no e or obliga on. The purchaser and/or user shall assume

liability for any modi

ﬁ

ca on and/or altera ons of this equipment from

original design or manufacture.

Содержание MX2000iS

































































Результаты поиска

Содержание MX2000iS

Отзывы:

Бренды по названию

Популярные бренды

maxwatt MX2000iS, Руководство оператора

Результаты поиска

Содержание MX2000iS

Отзывы:

Бренды по названию

Популярные бренды