Maxview Precision Waterways MXL024/55, Инструкция по установке и эксплуатации

Страница: 8 / 20

-
°
+
°
Use the elevation map to determine the required angle for your location. Set the dish to this angle using the
elevation knob and indicator.
Once satellite is located, lock off the rotation
by turning Azimuth lock knob. If you are
experiencing signal drop out, fine tune your
signal by slightly adjusting the elevation to
improve TV picture quality. Again, you can aid
this process by using:
1. The integrated sat finder.
2. Your receivers built in sat finder.
Slowly rotate your dish from left to right through
the zone (see page 12) until the correct satellite is
located and a picture appears on your TV.
To aid the satellite location process you can
use the following methods:
1. Use the integrated sat finder (page 11).
2. Use your receivers built in sat finder.
Please see overleaf for more information on both of
these methods.
N
S
TV
ASTRA 2
5
6 7
8