MaxVac MEDI 4e, Инструкция по эксплуатации

Страница: 14 / 20

MEDI 4e MAX-VAC.COM 14
CLEANING & MAINTENANCE
Outside cleaning
Wipe off any stains with a soft cloth. More stubborn dirt should be removed with soft
cloth and small amount of neutral detergent. During maintenance, do not scratch
the housing with a hard object.
Replacing filters
If the “Replacing Filter” icon lights up, it is time to replace the filter. Undo the finger
screws from the back of the unit to remove the back plate. Ensure you install the
new filters in the correct sequence and airflow direction.
Maintenance of the dust sensor
After the air purifier has been used for approx 3 months, the air quality sensor
should be cleaned to ensure air monitoring accuracy. Open the protective cover of
the air quality sensor port, and wipe off dirt accumulated on the cover with a cloth or
soft brush. Clean the lens & upper/lower sensor ports of the air quality sensor with
slightly damp cotton swab, and then carefully dry it. Reinstall the protective cover.
Replacement of UV-C lamp
To replace the UV-C lamps, remove the front panel of the machine. Remove the
HEPA13 filter in order to excess the UV-C lamps.
WARNING: ALWAYS unplug the machine before attempting to replace the UV-C
lamp. Never make direct eye contact with the UV-C light. It can cause severe
damage.