MaxTronic SS-6601E, Руководство пользователя

Страница: 31 / 32

SS-6601E & SS-6601R SAS Disk Array Systems
21
3
M
a
in
te
n
a
n
c
e
–
U
p
g
ra
d
in
g
M
e
m
o
ry
Upgrading Memory
The disk array system takes a single DDR II memory with a maximum capacity of 4 GB.
Follow these instructions to upgrade the memory.
1 Loosen the screws holding the controller cage in place, slide the controller-cage
out of the chassis.
2 Pull the memory retaining clips away from the memory; the memory springs out
of the socket. Remove the memory.
3 Gently push the new memory into the socket, then push the corners of the mem-
ory down. The memory is secured by the memory retaining clips. Push the con-
troller cage back in, lower the handle, and tighten the retaining screws.
Note
The memory module will fit in only one direction. Do not force the
memory into place.
LAN
COM
CTRL ready
EXP Access
EXP Link
Controller A
LAN
COM
CTRL ready
EXP Access
EXP Link
Controller B
CH 2
CH 1
CH 2
CH 1
Fan2
Fan3 Fan1
UPS
P/S
Chassis
ID
LAN
COM
CTRL ready
EXP Access
EXP Link
Controller A
LAN
COM
CTRL ready
EXP Access
EXP Link
Controller B
CH 2
CH 1
CH 2
CH 1
Fan2
Fan3
Fan1
UPS
P/S
Chassis
ID