4
OPERATING YOUR SOLAR SECURITY LIGHT
After the initial 3 day charge of your Solar Security Light, move the switch on the main body to the ON
position. Your Solar Security Light is now ready for use.
Underneath the motion sensor, there are 2 adjustment dials: TIME and LUX.
The light has been factory preset as follows:
TIME - Set at 30 seconds.
LUX - Set for your Security Light to activate at dusk when motion is detected.
If the above settings are not suitable for your application, then these may be
adjusted using a flathead screwdriver and the steps below.
TIME PERIOD ADJUSTMENT
The time period control dial sets the duration that the Solar Security Light will remain illuminated after the last
detected motion. The time period has an adjustable range of 10 seconds to 1 minute.
To decrease the time period, move the dial toward the ( – ) symbol.
To increase the time period, move the dial toward the ( + ) symbol.
Test the time period by triggering the motion sensor and measure the time period the light stays on. Adjust
the TI ME control until the desired illumination duration is reached.
A shorter TIME setting will conserve battery life. For best results, use the shortest TIME setting for your
location as possible.
LIGHT LEVEL ADJUSTMENT
The LUX dial controls the natural light level that triggers the Dual Head LED Security Spotlight and prevents
it from operating during daylight hours. Your Dual Head LED Security Spotlight comes preset for activation
at dusk.
To adjust for activation before dusk, move the dial toward bright (
).
To adjust for activation after dusk, move the dial toward dark (
).
MAINTENANCE TIPS:
The LED lights in your Solar Powered LED Security Spotlight will last up to 30,000 hours and should never
need replacement.
To keep your Solar Security Light looking best, keep the lens and solar panel free of dust and deposits by
wiping occasionally with a dry cloth or with warm soapy water.
It is important that the solar panel is kept free of dirt and debris at all times. A dirty solar panel will not
allow the batteries to be fully charged. This will shorten the life of the batteries and may cause the light to
malfunction.
COLD WEATHER FUNCTIONALITY
In temperatures below 20ºF, performance of Ni-MH batteries may be reduced. Normal performance will
return when the temperature rises.
SAFETY TIPS
Do not immerse the Solar Powered LED Security Spotlight in water or other liquid.
STORAGE
If you wish to store your light indoors for more than two or three days, turn the power switch to the OFF
position and remove the batteries to prevent damage to the batteries. Battery capacity may be reduced or
damaged during prolonged storage.
