TROUBLESHOOTING
MAXSA Innovations
8412 Cathedral Forest Drive
Fairfax Station, VA 22039
Tel: 703-495-0661
www.maxsainnovations.com
v
©20
MAXSA Innovations, LLC
MADE IN CHINA
Light does not turn on
when there is movement
in the detecton area.
Light turns on for no
apparent reason (false
trigger).
Light turns on during
daylight hours.
1. Batteries are old.
2. Nearby lighting is too bright.
3. The light is facing the wrong direction.
1. Heat sources such as air conditioners,
vents, barbecues, other outside lighting, or
moving cars are false triggering the
motion sensor.
2. Pets or other animals are false triggering
the motion sensor.
3. Reflections from swimming pools,
jacuzzis, white walls, or other large
reflective surfaces are false triggering the
motion sensor.
1. A roof, wall, tree, or other object is casting
a shadow on the sensor.
1. Replace the batteries.
2. Install the
LED Outdoor Wall Sconce in a
different location or facing a different
direction, away from other lighting.
3. Install the
LED Outdoor Wall Sconce
facing the desired detection area.
1. Install the
LED Outdoor Wall Sconce away
from the sources of interference.
2. Mounting the
LED Outdoor Wall Sconce
higher or facing the light in a different
direction may help.
3. Install the
LED Outdoor Wall Sconce away
from the sources of reflections.
1. Install the
LED Outdoor Wall Sconce in a
non-shaded location or facing a direction
away from sources of shadows.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
SPECIFICATIONS
Batteries Required:
4 C cell alkaline, Ni-MH, or Ni-Cd
LEDs:
5 x 0.075 Watt LEDs
Voltage:
6V DC
Light Duration:
approximately 30 seconds
Detection Angle:
90˚ (cone)
Maximum Detection Distance:
22 feet (7 meters)
Housing Weatherproof Rating:
IP33
Circuitry Weatherproof Rating:
IP44
page 3