MaxPro PROFESSIONAL MPPO1200, Руководство пользователя

Страница: 7 / 39

4 GB
other condi tion that may a ff ect the power tool’s opera tion. If damaged, have the power tool repaired
befor e use. Ma ny accidents are caused by poorly maintained power t ools.
f) Keep cu tting tools sharp and clean. Properly maintained cu tting tools with sharp cu tting edges are less
likely to bind and are easier to contr ol.
g) Use the power tool, accessories and tool bits et c. in accordance with these ins tructions, taking into
account the working co ndition s and the work to be perf ormed. Use of the power tool for opera tion s
di ff erent from those intended could result in a hazardous situa tion.
5) Service
a) Have your power tool ser viced by a qualified repair per son using only identi cal replaceme n t parts. This
will ensure that the safety of the power tool is maint ained.
SAFETY INSTRUCTION FOR POLISHER
Symbols
Observe the dimensions of the saw blade . The hole diameter must match the tool
spindle without play .
Danger Area! Keep hands far away from the cu tting a r ea while the machine is running.
Keep bystanders away .
1) Safe ty in s tructions for all opera tions
a) This power tool is intended to function as a polisher . Read all safety warnings, ins tructions, illustra tions
and specifi ca tions provided with this power t ool. Failure to follow all ins tructions listed below may result in
electric shock, fi re and/or serious injury .
b) This power tool is not recommended for grinding, sanding, wire brushing or cu tting o ff opera tion s .
Opera tions for which the power tool was not designed may create a hazard and cause personal injury .
c) Do not allow any loose portion of the polishing bonnet or its a tt achment strings to spin freely . Tuck away
or trim any loose a tt achment s trings. Loose and spinning a tt achment strings can entangle your fin gers or
snag on the w orkpiece.
d) Do not use accessories which are not specifi cally designed and recommended by the tool manufacturer .
Just because the accessory can be a tt ached to your power tool, it does not assure safe opera tion.
e) The rated speed of the accessory must be at least equal to the maximum speed marked on the power
t ool. Accessories running faster than their rated speed c an fly apart.
f) The outside diameter and the thickness of your accessory must be within the capacity ra ting of your
power t ool. In correctly sized accessories cannot be adequately guarded or contr olled.
g) The arbour size of wheels, flan ges, backing pads or any other accessory must properly fit the spindle of
the power t ool. Accessories with arbour holes that do not match the moun ting hardware of the power tool
will run out of balance, vibrate excessively and may cause loss of contr ol.
h) Do not use a damaged accessory . Before each use inspect the accessory such as abrasive wheels for
chips and cracks, backing pads for cracks, tear or excess wear, wire brushes for loose or cracked wir es. If the
power tool or accessory is dropped, inspect for damage or install an undamaged accessory . A ft er inspecting
and installing an accessory, position yourself and bystanders away from the plane of the rota ting accessory
and run the power tool at maximum no load speed for one minut e. Damaged accessories will normally
break apart during this tes t time.
i) Wear personal prot ecti ve equipmen t. Depending on applica tion, use face shield, safety goggles or
safety glasses . As appropriate, wear dust mask, hearing protectors, gloves and shop apron capable of
stopping small abrasive or work piece fragmen ts. The eye prot ection must be capable of stopping flyin g