24
Chapter 5
Disassembly Guide
1-Disassembly Step
The laser belongs to the precise valuables, so Maxphotonics recommends the
following steps to unpack the packing box.
Please unpack according to the following steps:
1. Place the package containing the laser equipment on a horizontal platform,
such as a floor or a large table.
2. Open the primary box and remove the foam cover,take out the fittings.
3. Check the fittings according to the ''Packing List''.
4. QBH and fiber optic cable are placed on the top plate of the laser. Please take
it out carefully to ensure that the minimum bending radius of the fiber optic cable
is >200mm. When taking out, it is recommended that the three people cooperate
to operate, two people lift the laser body, and the other person is responsible for
taking out the cable.
5. Please ensure that the laser is in a dry, ventilated, dust-free environment. The
space around the laser is unobstructed. The front of the laser and the operator's
position are unobstructed. There is no obstruction under the laser. There is
no dripping on the laser. The laser is located. The position of the drainage is
smooth and convenient, and there is no water accumulation.
6. Keep all objects after unpacking for future transportation or storage needs.
