12
Chapter 2
photomultipliers and photodiodes, need related protections.
WARNING:
◎ The Maxphotonics MFSC laser light is strong enough to cut or weld
metal, burn skin, clothing and paint. In addition, this light can ignite volatile
substances such as alcohol, gasoline, ether and other solvents. During
the operating process, the flammable materials around the laser must be
isolated.
3.Optical Operating Instructions
We strongly recommend that you read the following procedures
before operating the laser:
（1）Never look directly into the laser output port when the power is turned
on.
（2）Avoid positioning the laser and all optical output components at eye
level.
（3）Equip with laser beam casing.
（4）Remove the end-cover before switch ON laser. Or else the output
head will be damaged irreversibly.
（5）Ensure that all personal protective equipment is suitable for the
output power and wavelength range of the laser.
（6）Use the laser in a room with access controlled by door interlocks.
Post warning signs. Limit the safety areas to operate the laser.
（7）Please do not operate laser in darkened environments.
（8）Do not turn on the laser without an optical coupling fiber or the optical
output connector.
（9）Do not install or detach cutting heads or collimators when laser is
