9
Chapter 2 General Safety
Information
2-Laser protection
1.Laser Protection Requirements
You must wear the safety protective glasses while operating the laser, and
rationally select the safety protective glasses according to the lasing wavelength
of the laser. If the device is a tunable laser or Raman product, it emits light
over a range of wavelengths and the end user should confirm the laser safety
eyewear used protects against light emitted by the device over its entire range of
wavelength.
2.Laser Protective Equipment Suppliers
Maxphotonics recommends material or equipments provided by following laser
protective equipment suppliers for you, including LaserVision USA, Kentek
Corporation, Rochwell Laser Industries, etc. All the supplier information is
provided by Maxphotonics only for the convenience to use, so Maxphotonics
assumes no responsibility for any problem caused by using the products of
abovementioned suppliers.
NOTE :
◎
This device is classified as a high power Class IV laser instrument. It may
emit up to 1000X average power from 1060nm to 1100nm. This level of light
may cause damage to the eye and skin. Despite the radiation being invisible,
the beam may cause irreversible damage to the retina. Laser safety eyewear is
not provided with this instrument, but must be worn at all times while the laser is
operational.
