VIII. PROGRAMMING YOUR WX-80
, Continued
Entering FIPS Location Codes, Continued
locations, this will be the first of fifteen FIPS
codes (LOC 1 - LOC 15) that can be stored and
monitored.
3. If you do NOT want to retain the existing FIPS code
in this location cell, press the NO button.
Proceed to Step 5 to enter the new FIPS code.
4. If you DO want to retain the FIPS code currently in
this location cell, press the YES button.
The WX-80 will advance to the next location
cell (2 - 15). At each location cell, you must
make the same choice to either keep the existing
FIPS code or to enter a new FIPS code.
5.
To add or change a code
in a different location,
press the YES button repeatedly until you see the
first unused memory location or the code you
want to change, then press the NO button to
clear the existing code. Six dashes (- - - - - -) will
appear allowing you to enter a new FIPS code
for that location cell. Use the number keys (0-9)
to enter the 6-digit FIPS code you want to store.
NOTE:
If you make a mistake while entering the code
press NO to clear all digits. The dashes (- - - - - -) will
reappear and allow you to enter the correct code.
6. Press the YES button to store the desired codes in
memory.
20
