display and that system will be deleted from the scan list.
When system scan is initiated, the word
"LOCK"
will be
shown in the upper left portion of the display along with the
words
"IN SCAN"
denoting a system or systems have been
locked out of scan. To restore a system to the scan list
manually select the "LOCKed" system and press the
LCK
key. The word
"LOCK"
will disappear and the system
will now be scanned while in the system scan mode. The
"LOCK" information is stored in memory and will not be
affected by turning the power switch off.
Group Scan
There are two different ways the TM-4800 does group
scanning. Your Maxon Dealer programs these functions into
the radio during initial setup. Only those groups your Dealer
has enabled for group scan can be scanned. Group scan is
not available in conventional systems.
Auto Group Scan
There is no action required to initiate auto group scan.
Whenever a system is selected that is programmed for auto
group scan, those groups enabled will automatically be
scanned. When an incoming call on any enabled group is
detected, the radio will switch to this group, display the
group number, and unique identifier. The radio will continue
to display this group until a message comes from another
enabled group; the
SYS
key is pressed; or the
GRP
key is
pressed.
15
