Maxon SM5402, Руководство по эксплуатации

Страница: 10 / 25

15) Mounting Bracket with Hardware - Used to support the radio during installation
16) Microphone Hanger- Used to hang the microphone; also used to enable / disable CTCSS /
CDDCS squelch functions
Display Icons and Indications
z S - Indicates scan mode is active
z P-Indicates Priority scan mode and assigned priority channel
z L -Low RF Power is active.
SM5402 Radio Operations
Power On / Off - Volume:
Turn the radio on by rotating the On / Off - volume control clockwise until you hear a click and, if
enabled via Dealer programming, the self test
“
alert
”
tone will be heard. SM5402Radio will
briefly appear in the display. Turn the radio off by rotating the control counter clockwise.
Trunked Mode Operation
Your Maxon SM5402 Radio may be programmed to operate with both Trunked and Conventional
modes. There are only a few differences in their operation and these are detailed as follows.
Channel Monitoring:
While on a Trunked System, channel monitoring is performed automatically by the radio transceiver.
In accordance with the FCC rules, while operating on a Conventional System the channel must be
monitored prior to transmit-ting. In both Trunked and Conventional Systems, operation may vary
from System to System. Your Maxon Dealer will be able to assist with particular operational
parameters and procedures for the various Systems and functions.
Trunked Mode Operation, Continued
System
“
Handshaking
”
In a Trunked System, when the P-T-T is pressed on the microphone, a
“
Handshaking
”
routine occurs which establishes communications between the radio and Trunked System. When
the LED indicator glows steadily red, voice transmission may begin. If your Maxon Dealer has
enabled the
“
Clear to Talk
”
tone option, the radio will emit a short tone signaling voice