Maxon Railgate RCM-1250C, Руководство по обслуживанию

Страница: 14 / 51

14
1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
ADJUSTING DRIVE CHAIN
FIG. 14-1
1. Adjust drive chains as follows.
NOTE: Vehicle body must be empty
(unloaded) before performing
the following adjustment.
ADJUST DRIVE CHAINS
2. Remove cover from Cylinder Hous-
ing. Loosen the lock nut on each chain
adjusting rod
(FIG. 14-1) . Then lower
Platform to ground level.
3. Turn each chain adjusting nut (FIG.
14-1) an equal amount of clockwise
turns (alternate from chain to chain) until
hydraulic cylinder is fully compressed.
Then tighten the lock nut
(FIG. 14-1)
on each chain.
4. If either of the 2 chain rods are too
long, cut off the excess as shown in
FIG. 14-1 .
CYLINDER
LOCK NUTS
ADJUSTING
NUTS
ADJUSTING
RODS
PERIODIC MAINTENANCE