Maxon RA-35, Руководство по обслуживанию

Страница: 11 / 36

1
1
9
2
1
S
la
u
so
n
A
v
e.
S
an
ta
F
e
S
p
ri
n
g
s,
C
A
.
9
0
6
7
0
(8
0
0
)
2
2
7
-4
1
1
6
F
A
X
(
8
8
8
)
7
7
1
-7
7
1
3
11
PERIODIC MAINTENANCE CHECKLIST
Quarterly or 1250 Cycles (whichever occurs fi rst)
Semi-annually or 2500 Cycles (whichever occurs fi rst)
NOTE:
Make sure vehicle is parked on level ground while performing maintenance
checks.
Visually check the platform hinge pins for excessive wear and broken welds.
Do the
Quarterly or 1250 Cycles Checks
on this checklist.
Check the level and condition of the hydraulic fl uid.
Visually check all hoses and fi ttings for chafi ng and fl uid leaks. Tighten loose fi ttings or
replace parts as required.
Check electrical wiring for chafi ng and make sure wiring connections are tight and free
of corrosion. Use dielectric grease to protect electrical connections.
Check that all
WARNING and instruction decals
are in place. Also, make sure decals
are legible, clean, and undamaged.
Check that all bolts, nuts, and roll pins are in place. Make sure roll pins protrude evenly
from both sides of hinge pin collar. Replace fasteners and roll pins if necessary.
Check for rust and oily surfaces on Liftgate. If there is rust or oil on Liftgate or if the
Liftgate is dirty, clean it off. Touch up the paint where bare metal is showing. Refer to
the paint system
CAUTION
and recommended touchup kit on the preceding page.
Check for debris and dirt buildup on the slider rollers and rails. Clean out any buildup of
dirt and debris.