Maxon Quadmax MA-6060, Руководство пользователя

Страница: 6 / 127

R F E x p o s u r e C o m p l i a n c e
The use of this modem in any other type of host configuration that may not
comply with the RF exposure requirements should be avoided. During
operation, a minimum of 20 cm (8 inches) should be maintained between the
antenna, whether extended or retracted, and the user’s/bystander’s body
(excluding hands, wrists, feet, and ankles) to ensure RF exposure compliance
in accordance with ARPANSA guidelines. The modem is not designed, nor
intended, for use in applications within 20 cm (8 inches) of the body of the user.
Continued operational compliance of the modem relies upon it being used with
an AS/NZS 60950.1 approved SELV power supply.
Caution
This modem has been tested and found to comply with the limits pursuant to
relevant ACMA Standards. These limits are designed to provide reasonable
protection against harmful interference in an appropriate installation. This
modem generates, uses, and can radiate radio frequency energy and, if not
used in accordance with instructions, can cause detrimental interference to
other radio communication networks and devices. Use only the supplied or
approved antenna. Unauthorized antennas, modifications, or attachments could
impair performance, damage the modem, or result in violation of RF exposure
regulations.
There is no guarantee that electromagnetic interference will not occur in a
particular installation. If the modem does cause detrimental interference in
radio and television reception, which can be verified by turning the modem on
and off, the user is encouraged to try to correct the interference by one or more
of the following measures:
▪
Re-orient or relocate the receiving radio or TV antenna
▪
Increase the separation between the modem and the receiver
▪
Contact RF Industries Maxon Technical Support for assistance.