PS-SAU-1900E
Mar. 8
th
,1999 (Rev. 0.0)
--- CONFIDENTIAL AND PROPRIETARY ---
38
Stutter Dial
Tone
(STUTTER_DIAL_TON
E)
Applied to the analog loop
audio path by the LAU
when the external loop
goes to the off hook
condition (except in
response to an incoming
call) if a Message Waiting
signal has been sent to
the LAU by the B/S.
•
Frequency 1
•
Frequency 2
•
Feature ON/OFF.
•
Factory Yes
•
Field Yes
•
End User No
Busy Tone
(BUSY_TONE)
Applied to the analog loop
audio path by the LAU
when the CDMA far end
party line is busy
•
Frequency 1
•
Frequency 2
•
Amplitude
•
Factory Yes
•
Field Yes
•
End User No
Battery Low
Tone
(BATTERY_LOW_TO
NE)
Applied by the LAU to the
loop’s audio path, at
increasing close intervals,
when the internal battery
voltage falls to within 10
minutes of terminal
charge level.
•
Frequency 1
•
Frequency 2
•
Amplitude.
•
Numbers of
beeps.
•
Factory Yes
•
Field Yes
•
End User No
Dialed Digits Manual
Send
(ENABLE_PND_KEY)
When enabled, forces the
user to press the “#”
button to send gathered
digits to the B/S. If this
feature is disabled, then
the Dialed Digits
Autosend feature must be
enabled.
•
Feature ON/OFF.
•
Factory Yes
•
Field
Yes
•
End User No
Massage Waiting
(MSG_WAITING)
Indicate massage waiting
status
•
True/False
•
Controlled by
Massage waiting
information over
the Air
•
Will be cleared
when user check
up the
massage(voice
massage)
Enable EVRC
(EVRC_ON)
ENABLE EVRC audio
vocoding.
•
True/False
•
Factory Yes
•
Field
Yes
•
End User No
3.3.2.
Product Test and Maintenance.
The Test and Configuration software package will provide the capability to test each of the following LAU
features.
•
Visual display of LAU / telephone status (i.e., No Service, Conversation, etc.).
•
RF link tests (signal quality measurements and other available link parameters).
•
Hook switch status indication.
